Warbird Relics
Meeting All Your Aviation Needs From Yesterday To Tomorrow.
|
|
Warbird Relics Meeting All Your Aviation Needs From Yesterday To Tomorrow. |
|
This area of our site is dedicated to helicopter parts. Unless otherwise noted these parts are sold AS IS and the buyer is responsible for the ensuring their airworthiness. We will gladly assist with arranging for overhaul and repair if you wish. We will be adding over 5,000 items to this category so if you do not see it listed please email or call us. Thanks for looking! |
||
| Item No. | Description | |
 |
HP-01 | Pair Of Bell 206 Helicopter L3 Support Arms. These are L3 support arms removed from a Bell 206 JetRanger. They do not appear to be damaged or cracked. The arm is marked 206-033-505-3. |
| HP-04 | OH 22A658 Tach Generator. Used with various types of aircraft and also listed as Bell Helicopter P/N 206-062-627-1. It was overhauled and stored since. (HG5-1) $250.00 | |
| HP-03 | Bell 47-682-056-1 Helicopter Flange. This is a unused flange still sealed in the original box. Tag reads CLASS CODE 1ATD(0128), PART NO. 47-682-056-1, NOMENCLATURE FLANGE, ITEM NO. 437. | |
 |
HP-04 | Pair Of Bell 206 Roll Over Support Cages. This is a pair of undamaged roll over cages for a BEll 206 JetRanger. They are of tube constructions and the mounts are not broken or cracked. $50.00 |
 |
HP-05 | Bell 47 Helicopter Foot Pedal In Box. Unused foot pedal for a Bell 47 helicopter still in the box. The box tag reads CLASS CODE 01T, PART NO. 47-650-020-2, ITEM NO. 12, PART NAME Pedal Assy., ORDER NO. 5586, DATE 8-15-57, CONTRACT NO. AF36(600)2028. $15.00 |
| HP-06 | Bell 47-682-129-3 Helicopter Support Arm. This is a unused support arm for the Bell 47. It is in excellent condition and marked 47-682-129-3. | |
 |
HP-07 | Bell 206 JetRanger Helicopter Actuator. This is a actuator assembly removed from a Bell 206 helicopter. It appears to be in very good condition without any damage to case or rod. It is marked with the BHC part number 206-001-074-1. $25.00 |
 |
HP-08 | Military Helicopter Tail Rotor Support Arm. Support or stabilizer for the tail rotor of an unknown military helicopter. Shafts are straight and unit is undamaged, It was last repaired at the Cumberland depot and is listed as P/N 114R3006-10. The bearings on the end have surface rust from storage but should clean up. $20.00 |
 |
HP-09 | Bell 204 Helicopter Irreversible Hydraulic Valve. Hydraulic valve removed from a Bell 204 helicopter. Case is undamaged and safety wire is still in place. Data plate is stamped HYD. RESEARCH & MFG. CO., HYD. PRESSURIZED IRREVERSIBLE VALVE, BHC SPEC. NO. 204-076-055, BHC PART NO. 204-076-055-1. $25.00 |
 |
HP-10 | Tagged Helicopter Master Brake Cylinder. Green tagged master brake cylinder removed from an unknown helicopter. It is in very good damage without damage to case or rod. The data tag reads STERER MASTER BRAKE CYLINDER, 11750. $25.00 |
 |
HP-11 | Bell 204 UH-1 Helicopter Crank Assembly. This is a crank assembly removed from a Bell 204 or UH-1 Huey helicopter. It is undamaged with connecting arm in place. the crank is stamped with the Bell P/N 204-001-779-1. SOLD |
 |
HP-12 | Sikorsky Helicopter Damper Assembly. We were told this is a dampner assembly from a Sikorsky helicopter. It needs cleaning but is in very good condition without damage to the housing or shaft. The tag lists is as F/S 1560-560-5931. $35.00 |
 |
HP-13 | Bell 204 205 Helicopter Rotor Drive Shaft. This is a rotor drive shaft from a UH-1 Huey, Bell 205 or Bell 204 helicopter. The data plate reads PART NO. 20504000421, BELL HELICOPTER CO. $55.00 |
 |
HP-14 | Bell 205 Helicopter Manifold Fuel Valve Assembly. It appears to be in very good condition without damage to the case or connectors. The data tag on the top is stamped FUEL VALVE MANIFOLD, PART NO. P 13-389, BHC PN 205-060-611-3. $25.00 |
 |
HP-15 | Bell 204 And UH-1 Helicopter Tail Rotor Grip. This is the grip removed from a Bell 204 or UH-1 helicopter. It is in very good damage without any signs of damage. The data plate is stamped BELL PART NO. 204-011-706-17 CHG. 3. OUT OF STOCK |
 |
HP-16 | Bell 204 Helicopter Swash Plate Arm. This is a swash plate support arm from a Bell 204 helicopter. It is not cracked or bent and is in very good condition. Bearing is in place and was sealed on removal. $35.00 |
 |
HP-17 | Unknown Helicopter Tension Control Lever. This is a tension control lever removed from an unknown aircraft. It is in great condition and has not been damaged or repaired. $10.00 |
 |
HP-18 | Boeing Goodyear Helicopter Brake Caliper. Unused brake caliper from a YHC-1A/B, BV234 and CH47. helicopter. It is in great condition and undamaged. The data tag is stamped ASSY 9532589, PART 9541655, GOODYEAR. $45.00 |
| HP-19 | Bell 206 Helicopter Trunnion. New in the box. The tag reads Bell P/N 206-011-105-1, NSN 1615-00-125-408. | |
 |
HP-20 | Bell 209 OH-58 Helicopter Fuel Receptacle. This is a fuel receptacle removed from an unknown Bell 209 or OH-58 helicopter. The data plate is stamped RECEIVER CLOSED CIRCUIT REFUELING, HR TEXTRON, CODE IDENT. NO. 96124, HR P/N 745000-101, CUST. BELL HELI., CUST. P/N 209-060-694-101, RATED FLOW 35 GPM, TANK OVERPRESSURE SHUTOFF 2.25 PSI. OUT OF STOCK |
 |
HP-21 | Dorne & Margolin Helicopter Antenna DM N4-4-1. Antenna removed from a military helicopter. It is weathered but undamaged and has not been repaired. It is a balanced loop single element with a frequency rating of 108-122 MHz. The data tag reads ANTENNA TYPE DM N4-4-1, DORNE & MARGOLIN. Also stamped 5826-00-739-4479. |
 |
HP-22 | Bell 206 Helicopter FM Homing Antenna. Antenna from a Bell 206 helicopter. The antenna is undamaged and connector is in place. The data tag reads ANTENNA, FM HOMING (RH) BHC PART NO. 206-075-523-2, CCC PART NO. FMH10-36-4, COMMUNICATIONS COMPONENTS CORPORATION. |
 |
HP-23 | New Sikorsky Helicopter Link Connecting Rod. This is an unused connecting link for a Sikorsky helicopter. Unit is still in original packaging. They are listed as FSN 3040-00-017-2404 and P/N S6140/61130/16. The unit measures 11 1/4" from end to end. SOLD |
 |
HP-24 | A-7907-1 Boeing Helicopter Seat Cushion. This auction is for a new cushion for an unknown helicopter. I have several of these and you will receive one in the sealed box. It was manufactured in 1997 and they are a dark blue. The end is marked CUSHION ASSY - PILOT SEAT, C.R. DANIELS, A-7907-1, 9/97. $35.00 |
 |
HP-25 | NEW Bell UH1 Helicopter Manual Rotor Lever. This is an unused manual control lever from a Bell UH-1 helicopter. This was used on the Bell UH-1 helicopters that used the 540 rotor system. The Model 540 rotor system was known as the "door-hinge" rotor or "Stability Control Augmentation Scheme (SCAS)". This one is perfect condition and has never been mounted. Stamped 540-011-302-1, MAY 11 '83, PASSIVATED CHG 3. |
| HP-26 | NOS Bell 47-645-016-1 Gearbox Spanner Wrench. This is a new spanner wrench for the Bell 47 helicopter in the original box. It is used on the tail rotor gear box seal ring. $35.00 | |
| HP-27 | NOS Bell 47-644-148-2 Hangar Assy. Bearing. This is an unused bearing for the Bell 47 helicopter in the original box. It is used with the tail rotor drive hangar assy. | |
| HP-28 | NOS Bell 47-644-148-3 Hangar Assy. Bearing. This is an unused bearing for the Bell 47 helicopter in the original box. It is used with the tail rotor drive hangar assy. | |
| HP-29 | NOS Bell 47-644-148-4 Hangar Assy. Bearing. This is an unused bearing for the Bell 47 helicopter in the original box. It is used with the tail rotor drive hangar assy. | |
| HP-30 | NOS Bell 47-644-148-6 Hangar Assy. Bearing. This is an unused bearing for the Bell 47 helicopter in the original box. It is used with the tail rotor drive hangar assy. | |
| HP-31 | NOS Bell 47-644-148-7 Hangar Assy. Bearing. This is an unused bearing for the Bell 47 helicopter in the original box. It is used with the tail rotor drive hangar assy. | |
| HP-32 | NOS Bell 47-630-003-4 Cable Assembly. Unused cable assembly used with the Bell 47 helicopter. It still in the original box and in very good condition. | |
| HP-33 | NOS Bell 47-620-265-1B Sprocket Assembly. Unused sprocket assembly used with the Bell 47 helicopter., It still in the original box and in very good condition. | |
| HP-34 | NOS Bell 47-620-061-1 Spring Assembly. Unused spring assembly used with the Bell 47 helicopter. It still in the original box and in very good condition. | |
| HP-35 | NOS Bell 47-631-074-1 Control Cable. Unused cable assembly used with the Bell 47 helicopter. It is not in the box but still has original tag and is in very good condition. | |
| HP-36 | NOS Bell 47-641-026-1 Screw. This is an unused screw for the Bell 47 helicopter. It is in the original box and in very good condition. | |
 |
HP-37 | Sikorsky UH-60 Helicopter Tail Landing Gear. Tail gear assembly from a Sikorsky UH-60 "Blackhawk" helicopter. In very good condition without any cracks or chips to the housing. It is listed as P/N 70250-13103-042. |
 |
HP-38 | Sikorsky UH-60 Helicopter Cargo Door Window. Cargo door window from a Sikorsky UH-60 helicopter. It is in good condition and is not cracked. The frame is also in good condition and tabs are in place. It is listed as P/N 70217-02705-042 |
| HP-39 | Sikorsky UH-60 Helicopter RH Cargo Door. Right hand access (cargo) door removed from an unknown UH-60A helicopter. It appears to be in good condition and made of composite without punctures or repairs. The latch rods are in place and in good working order. It is not marked with a part number that I could locate. | |
| HP-40 | Pair Sikorsky UH-60 Helicopter Exhaust - Infrared Suppressor. This an exhaust from a Sikorsky UH-60A helicopter. It is part of the infrared suppressor system and is in good condition. The mounts are undamaged and the housing is not punctured or cut. It is listed as Sikorsky P/N 70308-03801-114 and GE P/N 6061T56G01. | |
| HP-41 | NOS Bell 47-150-137-1 Washer. Unused washer assembly used with the Bell 47 helicopter and in the original packaging. It fits the pitch control sleeve bearing lock. (HG-6) | |
| HP-42 | NOS Bell 47-267-051-5 Sleeve Unused sleeve for the Bell 47 helicopter. It is in the original box and in very good condition. (HG-3) | |
| HP-43 | NOS Bell 47-631-136-5 Block. Unused block for the Bell 47 helicopter. It is in the original packaging and in very good condition. (HG-25) | |
| HP-44 | NOS Bell AH-1 Plate. Unused plate assembly for the Bell AH1 helicopter. It is in the original packaging and in very good condition. (HG-1) | |
 |
HP-45 | Model C-160 Boeing CH-47 Helicopter Cargo Hook. This is a cargo hook from a Boeing helicopter (probably CH-47). It is in good condition without damage to the housing or connector. The swivel moves easily and hook itself appears undamaged. The data plate reads CARGO HOOK, MODEL C-160, CONT. CAP. 16000 LB/7257 KG, MAX. CAP. 20,000 LB/9072 KG, VOLTS 22-30 AMP MAX 16, PART NO. 17169-4, DATE MFG 4/83, CUST. NO. 145ES102-4 EASTERN ROTORCRAFT. It is also referenced as NSN 1680-01-123-2540. SOLD |
 |
HP-46 | Sikorsky UH-60, SH-60 Helicopter Blade Fold Test Set. This is a blade test set for the Sikorsky SH-60 (LAMPS Mk. 3) helicopter. It is integrated into it's own metal transport case with cables stored in the top lid. All controls move easily and the LED"s are undamaged. The data plate reads DATE 90/16, PART NO. 70625-1, DISTRIBUTOR TEST SET, DYNAMIC CONTROLS CORP. It is also listed as NSN 4920-01-242-9632. It was removed from service for calibration and work was never done. |
| HP-47 | Sikorsky UH-60 Helicopter Pedal Adjuster Actuator. Pedal adjuster actuator removed from a Sikorsky UH-60 helicopter. It is in very good condition without damage to the housing or mounts. The shaft is straight and lever is in place. The data tag reads ACTUATOR, PEDAL ADJUSTER, MODEL (C130-4) LOAD 100 LB., SIKORSKY CONTROL NUMBER 70400-01607-108, SIMMONDS PRECISION. | |
 |
HP-48 | Sikorsky Helicopter Roll Trim Servo P/N 70400-02260-116. Roll trim servo assembly removed from an unknown Sikorsky helicopter. It is in good condition without damage to the housing or mounts. The connectors are also undamaged and the control lever is in place. The data plate reads CURTISS WRIGHT FLIGHT SYSTEMS, INC., NAME TRIM SERO, ROLL, C-W PART NO. 181951-8, SIKORSKY I.D. NO. 78286, DATE 2Q88S, SIKORSKY PART NO. 70400-02260-116. It is also referenced as NSN 1680-01-188-8208. |
Thanks For Looking! If You Have Any Question Or Comments, Please Feel Free To Email Us At webmaster@warbirdrelics.com